Carrots & root crops

Washer & Drying Table Combination

A barrel washer and a 20-roller drying table on one machine, so every wet transition drains into one tank and is managed in one place. Built with 3 or 4 metre barrels at 1200 or 1500 mm diameter.

Barrel Washer

A stainless steel barrel washer in lengths from 3 to 9 metres and 1200 or 1500 mm diameters, sized to your volume and to how dirty the crop comes in.

Pre-Soak Tank

Up to 125 tons (250,000 lb) per hour

Soaks product ahead of the washer so dirt loosens, stones drop and floating debris comes off early, at up to 125 tons per hour. It also holds product so the wash line gets an even feed.

De-Stoner

Takes stones and clods out at the start of the line, standalone or mounted on an HJV washer. 85% of the standalone unit's components move onto an HJV wash system if you add one later.

Root Crop Polisher (HJV 1430)

The HJV 1430 polishes carrots, potatoes and other root vegetables with segmented brush rollers, and its bearing cartridges come out without special tools.

Brush Table

A rotating brush bed that cleans potatoes, seed potatoes and onions gently, with rollers that lift out from the top for cleaning.

Water Recirculation System (WRS)

Cleans and reuses wash water on stationary and mobile lines, so less goes to discharge ponds. It uses HJV Typhoon, a biodegradable flocculant that settles fine clay particles.

Dirt-Sep

A set-and-run separator for intake lines: top removal plus two dirt separation modules, built to move between crops without readjusting.

Xtractor

A cleaning table with on-demand roller gap and height control and its own electric drive on every shaft, so you can change settings on the go or call up a saved recipe.

CX Coil Expander

Expanding coil rollers with a gap adjustable from 12.5 mm (1/2") to 89 mm (3.5"), for taking dirt out in wet conditions or pulling a size profile out of the flow. Widths from 900 to 2400 mm.

Drying Table

Closed-cell foam sponge rollers, kept under air pressure, dry product evenly. The sponges resist taking on water, so they keep drying and last longer.

Roller Inspection Table

Blue-background inspection tables with LED lighting and E-stops, in widths from 450 to 1500 mm, for the manual final check.

Conveyors & Elevators

Stainless conveyors and elevators with endless food-grade PVC belts, soft drop zones at transitions, and same-diameter shafts that need no machining to replace.

Storage Bins

High-capacity bins that keep trucks moving, and multi-compartment bins for pre-sized product so packing equipment runs at a steady speed.

Even Flow Hopper

A loading hopper that meters product onto the line at a steady rate. Fill it with a loader over the end or sides, or with a dipping-end elevator.

Box Tipper

A hydraulic, full stainless box tipper that tips up to 160 degrees for complete emptying, with perimeter fencing and light bars. Manual or fully automated.

Agrimech Weighers

Themis: 10 t/h in 25 kg sacks · Typhon: 30 x 2 kg per minute

Agrimech's Themis single-bin weigher for large packs (10 tonnes per hour in 25 kg paper sacks) and Typhon multi-head weigher for small packs (30 x 2 kg per minute, accurate to within 2 grams).

Agrimech Bagging & Closing

Up to 24 bags per minute (Kwik Lok)

Agrimech bag placing and closing: Kwik Lok bagging at up to 24 bags per minute, Nemesis and Genesis bag placers at up to 450 and 700 cycles per hour, and Retribution stitching systems.

Agrimech Palletizing

6-8 packs/min bottom loading · 10-40 packs/min top loading

Agrimech palletizers stack bags and boxes onto pallets: the Titan bottom-loading system at 6-8 packs per minute and top-loading systems at 10-40 packs per minute.

Agrimech Tray Filling

Agrimech's Delta tray filling system places potatoes, carrots and onions into plastic trays, cardboard boxes and cartons, with gentle handling and quiet operation.

Agrimech Master Baler

The Agrimech Olympus Master Baler counts and batches pre-packed bags into bales, using a spring-pressured hugger belt and dividing bins. Paper, plastic or net.

Line Automation & Controls

HJV automation ties the line together: programmed recipes for product changes, automatic load control, sequence starts, and remote programming and diagnostics over Wi-Fi, cellular or hardwired connections.