Barrel Washer
A stainless steel barrel washer in lengths from 3 to 9 metres and 1200 or 1500 mm diameters, sized to your volume and to how dirty the crop comes in.
Washer & Drying Table Combination
A barrel washer and a 20-roller drying table on one machine, so every wet transition drains into one tank and is managed in one place. Built with 3 or 4 metre barrels at 1200 or 1500 mm diameter.
The combi-washer puts the barrel washer and the drying table in the same machine. Product leaves the barrel and goes straight onto a 20-roller drying table, and the water from every wet transition is caught by one tank instead of running across your floor.
It suits fresh-pack sheds and processing lines that are short on floor space or want wash and dry on one footprint. The barrel is 4 mm stainless sheet with a "D" mold rubber spiral, over an auger base tank.
Maintenance is planned in: access doors with safety locks and gas struts, an electrically operated door with remote operation, hatches into the tank, and split bearings on the top shaft. When your soil calls for it, add an integral de-stoner, floating debris removal or a drag chain for sludge.
Why it works
Highlights
- 01
Full stainless steel construction
- 02
20-roller drying table built in
1100 mm (43") wide on 1200 mm barrels, 1400 mm (55") on 1500 mm barrels.
- 03
One tank catches every wet transition
Washing and drying water is managed in one area.
- 04
Access doors with safety locks and gas struts
Plus an electrically operated door with remote operation.
- 05
Fresh water rinse bar with solenoid valve
Extra spray bars available.
- 06
Split bearings on the top shaft
For easier maintenance.
Data
Models and sizes
| Model | Barrel length | Barrel diameter | Drying table |
|---|---|---|---|
| 3 m 1200 | 3 m (10') | 1200 mm (48") | 20 rollers, 1100 mm (43") |
| 4 m 1200 | 4 m (13') | 1200 mm (48") | 20 rollers, 1100 mm (43") |
| 3 m 1500 | 3 m (10') | 1500 mm (60") | 20 rollers, 1400 mm (55") |
| 4 m 1500 | 4 m (13') | 1500 mm (60") | 20 rollers, 1400 mm (55") |
Configure it
Options
Drag chain for sludge and waste removal
Multiple rinse bars
Brush lining for the barrel
Full or half pintle lining
Star shafts for chip removal
Integral de-stoner
Floating debris removal
Video
See it running
Play video: HJV Engineering washline in actionWashing & stone removal
Works alongside
Pre-Soak Tank
Up to 125 tons (250,000 lb) per hour
Soaks product ahead of the washer so dirt loosens, stones drop and floating debris comes off early, at up to 125 tons per hour. It also holds product so the wash line gets an even feed.
De-Stoner
Takes stones and clods out at the start of the line, standalone or mounted on an HJV washer. 85% of the standalone unit's components move onto an HJV wash system if you add one later.
Planning a line? Talk to the HJV Engineering team.
Tell us what you run, how much of it, and where it goes next. We'll lay out the line with you.