Washer & Drying Table Combination
A barrel washer and a 20-roller drying table on one machine, so every wet transition drains into one tank and is managed in one place. Built with 3 or 4 metre barrels at 1200 or 1500 mm diameter.
De-Stoner
Takes stones and clods out at the start of the line, standalone or mounted on an HJV washer. 85% of the standalone unit's components move onto an HJV wash system if you add one later.
Stones and clods damage product, wear out machines downstream and settle in flumes. The HJV high-volume de-stoner takes them out at the beginning of the process with a high capacity solids-handling pump and a rubber chevron elevator belt built to carry stone.
Run it standalone if stones and clods are the problem today. When a washer is in your plans, 85% of the standalone de-stoner's components move onto an HJV wash system, so what you buy now keeps working later.
The integral version mounts directly on an HJV washer, or goes into an in-ground flume system so stones never settle in the flume. It shares the washer's water supply, which cuts overall water use, and a simple valve adjustment fine-tunes stone removal.
Why it works
Highlights
- 01
85% of components transfer to an HJV washer
Start standalone, grow into a wash line.
- 02
High capacity solids-handling pump
Open impeller, no filters required.
- 03
Rubber chevron elevator belt
Built to handle stones.
- 04
Shares the washer's water supply
Less total water use.
- 05
Simple valve adjustment
Fine-tune how much is removed.
- 06
Quick-release door
For cleaning and access to the elevator tail.
Configure it
Options
High capacity de-stoner
Sludge removal chain
Floating debris removal
Out-feed widths
900 mm (36") or 1200 mm (48")
In-feed conveyor
900 mm (36") or 1200 mm (48") wide
Dirt-Sep in-feed
Full HMI automation
In-flume installation
Removes stones before they settle in the flume.
Video
See it running
Play video: Integral de-stonerWashing & stone removal
Works alongside
Barrel Washer
A stainless steel barrel washer in lengths from 3 to 9 metres and 1200 or 1500 mm diameters, sized to your volume and to how dirty the crop comes in.
Pre-Soak Tank
Up to 125 tons (250,000 lb) per hour
Soaks product ahead of the washer so dirt loosens, stones drop and floating debris comes off early, at up to 125 tons per hour. It also holds product so the wash line gets an even feed.
Planning a line? Talk to the HJV Engineering team.
Tell us what you run, how much of it, and where it goes next. We'll lay out the line with you.