Washer & Drying Table Combination
A barrel washer and a 20-roller drying table on one machine, so every wet transition drains into one tank and is managed in one place. Built with 3 or 4 metre barrels at 1200 or 1500 mm diameter.
Xtractor
A cleaning table with on-demand roller gap and height control and its own electric drive on every shaft, so you can change settings on the go or call up a saved recipe.
The Xtractor is the HJV separator for variable conditions. Each shaft has its own electric drive with independent speed control, and roller gap and roller height adjust on demand, so you can respond to wet ground or a change of crop without stopping the line.
Preset recipes store settings by crop and soil, so the operator calls up a setup instead of starting from scratch. A pre-spread roller system lays product across the width ahead of 4 or 6 separator rollers.
Gentle agitation takes out dirt and debris with little product loss, and cleaner crop going into storage stores better. The Xtractor cleaning system is also built into the Split Grader and Cyber Sort.
Why it works
Highlights
- 01
On-demand roller gap control
- 02
On-demand roller height control
- 03
Independent electric drive on every shaft
Each with its own speed control.
- 04
Preset recipes
Change settings at the touch of a button.
- 05
Electric locking safety guards
Washing & stone removal
Works alongside
Barrel Washer
A stainless steel barrel washer in lengths from 3 to 9 metres and 1200 or 1500 mm diameters, sized to your volume and to how dirty the crop comes in.
Pre-Soak Tank
Up to 125 tons (250,000 lb) per hour
Soaks product ahead of the washer so dirt loosens, stones drop and floating debris comes off early, at up to 125 tons per hour. It also holds product so the wash line gets an even feed.
Planning a line? Talk to the HJV Engineering team.
Tell us what you run, how much of it, and where it goes next. We'll lay out the line with you.