Washer & Drying Table Combination
A barrel washer and a 20-roller drying table on one machine, so every wet transition drains into one tank and is managed in one place. Built with 3 or 4 metre barrels at 1200 or 1500 mm diameter.
CX Coil Expander
Expanding coil rollers with a gap adjustable from 12.5 mm (1/2") to 89 mm (3.5"), for taking dirt out in wet conditions or pulling a size profile out of the flow. Widths from 900 to 2400 mm.
The CX Coil Expander is eight rollers long, on a scissor-action frame that opens the gap between coils from 12.5 mm (1/2") to 89 mm (3.5"). The same machine does two jobs depending on how it's built.
For dirt removal in dirty, wet conditions, a hydraulic drive spins the coils so they clean themselves by centrifugal force and stay open in heavy soil. The gap adjusts with hydraulic cylinders or electric actuators.
For sizing, individual electric drive shafts and electric actuator gap adjustment give six sizing gaps, and each shaft's speed can be changed to control how product flows across the table.
With HJV automation, preset gap and speed settings for each crop, soil or size profile are a button press away. Parts are shared across the range and service points are easy to reach.
Why it works
Highlights
- 01
Gap from 12.5 mm to 89 mm
1/2" to 3.5".
- 02
Self-cleaning coils
Hydraulic drive for wet, dirty conditions.
- 03
Six sizing gaps
On the sizing version.
- 04
Preset gap and speed settings
With HJV automation.
- 05
Six widths
900 mm (36") to 2400 mm (95").
Data
Models and sizes
| Width (mm) | Width (in) |
|---|---|
| 900 | 36 |
| 1200 | 48 |
| 1500 | 60 |
| 1800 | 70 |
| 2100 | 83 |
| 2400 | 95 |
Washing & stone removal
Works alongside
Barrel Washer
A stainless steel barrel washer in lengths from 3 to 9 metres and 1200 or 1500 mm diameters, sized to your volume and to how dirty the crop comes in.
Pre-Soak Tank
Up to 125 tons (250,000 lb) per hour
Soaks product ahead of the washer so dirt loosens, stones drop and floating debris comes off early, at up to 125 tons per hour. It also holds product so the wash line gets an even feed.
Planning a line? Talk to the HJV Engineering team.
Tell us what you run, how much of it, and where it goes next. We'll lay out the line with you.